Southport Home Services Residential HVAC Caledonia, Wisconsin
FREE In-Home Estimate: 262-898-3000 and 24 Hour Emergency Service
RESIDENTIAL
Southport Serving both Residential & Commercial customers throughout Racine County
COMMERCIAL

Barracuda Sump Pump Repair in Wisconsin

Plumbing Contractors >> Sump Pump Service >> Barracuda Sump Pump Repair

Barracuda Sump Pump MaintenanceWI Barracuda Sump Pump Repair

The Wisconsin plumbers at Southport have quality experience repairing Barracuda sump pumps. While common in most brands, the pump housing and impeller are prone to quickly wear down, and often need replacing. If you notice this, or have any other issues with your Barracuda sump pump, call the sump pump repair experts at Southport Plumbing - We're on call 24 hours a day, 7 days a week.

The sump pump service professionals at Southport carry all the Barracuda sump pump replacement parts you could need, and offer great rates on:

  • Barracuda 691-3205 Sump Pump Repair
  • Barracuda 691-3316 Sump Pump Repair
  • Barracuda 691-3209 Sump Pump Repair
  • Barracuda 691-3210 Sump Pump Repair
  • Barracuda 691-3317 Sump Pump Repair
  • Barracuda 691-3202 Sump Pump Repair
  • Barracuda 691-3206 Sump Pump Repair

Barracuda Sump Pump Troubleshooting

Barracuda Sump Pump ProblemSolution

Pump does not turn on

  1. Make sure pump is plugged in
  2. Check for blown fuses or tripped circuit breakers or tripped outlets
  3. Check pump by bypassing the switch and plugging the pump directly into the outlet.
  4. Check for any obstructions in the impeller

Pump starts and stops too often

  1. Check for backflow of water from discharge hose/pipe
  2. Check float switch for proper operation

Pump will not shut off

  1. Make sure switch drops to full down position
  2. Check for obstructions in piping

Pump runs and moves little or no water

  1. Check for air leaks in the suction line
  2. Check for obstructions in suction and/or discharge lines
  3. Make sure liquid is supply is within pumping range
  4. Check impeller for signs of wear
  5. Check pump housing for wear
  6. Make sure check valve is is installed in the correct direction

Impeller shaft does not turn

  1. Make sure the motor is rotating in the same direction as the pump/impeller
  2. If the pump is new, spray oil or other lubricant in the suction and discharge post to loosen
  3. Turn grease cups 1/2 to 1 turn to lubricate impeller shaft
  4. Make sure you have a properly sized motor to operate the pump

Wisconsin's BEST Sump Pump Repair

Air Conditioning
Services
Central Air Conditioning unit service & installation
Heating
Services
Furnace & heating systems repair & installation
Indoor Air Quality
Services
Indoor air quality improvement equipment service & installation
Plumbing
Services
Residential Plumbing Serivices in Southeastern Wisconsin